Rear Side Door Window Weatherstrip Replacement New Style

Important: The old 1-piece weatherstrip design will work in place of the new 2-piece design.

1. Lower the rear door window.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Verify if the front weatherstrip guide and weatherstrip is a 1-piece weatherstrip or the new 2-piece design.
5. Remove the bolt from the weatherstrip guide .
6. Remove the weatherstrip guide pressing down and out of the door.
7. Remove the weatherstrip from the door.

1. Install the weatherstrip guide to the door by pushing the clip on the guide up into the down slot.
2. Install the weatherstrip to the door.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the weatherstrip guide bolt.

Tighten
Tighten the bolt to 10 (89 lb in).

4. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
5. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
6. Inspect the rear door window for proper alignment and operation.