Removal Procedure
- Remove rear transaxle mount through bolt.
- Remove one of three transaxle mount bracket to frame bolts.
Caution: Ensure that the vehicle is properly supported and squarely positioned.
To help avoid personal injury when a vehicle is on a hoist, provide additional support
for the vehicle on the opposite end from which the components are being removed.
- Raise vehicle on hoist.
- Remove remaining mount bracket to frame attachment
bolts.
- Remove transaxle mount bracket from vehicle.
- Remove the transaxle mount to transaxle bolts.
- Remove transaxle mount from vehicle.
Installation Procedure
- Install rear transaxle mount to transaxle and
tighten fasteners.
Tighten
Tighten Rear Transaxle Mount-to-Transaxle Bolts to: 90 N·m (66 lb ft)
- Install the two transaxle mount bracket to frame
attachment fasteners and tighten.
Tighten
Tighten Rear Transaxle Mount Bracket-to-Frame Bolts to: 60 N·m (44 lb ft)
- Lower vehicle from hoist.
- Install and tighten the transaxle mount bracket
to frame attachment fastener.
Tighten
Tighten Rear Transaxle Mount Bracket-to-Frame Bolts to: 60 N·m (44 lb ft)
- Install the transaxle mount to bracket through bolt.
Tighten
Tighten Rear Transaxle Mount Through Bolt to: 90 N·m (66 lb ft)