GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 ION 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Compartment Lid Latch Striker Replacement

Removal Procedure

    Object Number: 872832 Size: SH
  1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
  2. Mark around the striker with a grease pen to retain the position of the lock striker.
  3. Remove the lock striker bolts.
  4. Remove the lock striker from the rear compartment.

Installation Procedure

    Object Number: 872832 Size: SH
  1. Position the lock striker to the alignment marks.
  2. Install and hand tighten the striker and bolts.
  3. Slowly close the compartment lid. Inspect the striker alignment.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the lock striker bolts.

    5. Tighten
    Tighten the rear compartment lid lock striker bolts to 10 N·m (89 lb in).

  5. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .