Windshield Wipers Streak During Wiper Operation (Replace Windshield Wiper Blade Assembly)

Some customers may comment on windshield wipers streaking across windshield during wiper operation.

The wiper blades may be positioned at an angle that allows them to streak across windshield glass during wiper operation.

Install new wiper blade assembly (one side or both sides, as needed). Refer to service procedure in this bulletin.

Wiper Arm Blade Replacement (SI Document ID #872025)

Removal Procedure

1. Move the wiper arm to the service up position.



2. Press the wiper blade clip button in to release the wiper blade from the inside radius of the wiper arm.
3. Remove the wiper blade out through the opening in the wiper arm.

Installation Procedure

1. Install the hook of the wiper arm through the opening in the new wiper blade.
2. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
3. Position the wiper blade pivot in the inside radius of the wiper arm hook.
4. Move the wiper arm back to the parked position.
5. Operate the windshield wipers and inspect for proper operation.

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for B1783 (Blade and/or Insert [Wiper System], One or Both - Replace).