• | Release the wiring harness for clutch coil of compressor (2). |
• | Remove the bolt. |
• | Remove the retaining ring (1). |
• | Remove the clutch coil off compressor. |
Caution: Refer to Fastener Caution in the Preface section.
Note: When installing the compressor clutch coil, ensure correct seating of detent.
1.1. | Position the clutch coil. |
1.2. | Insert the retaining ring. |
1.3. | Connect the wiring harness. |
Tighten
Tighten the bolt to 4 N·m (35 lb in).