Removal Procedure
- Remove the heating/air conditioning control. Refer to
Heater and Air Conditioning Control Replacement.
- Remove the accessory panel from the instrument panel (I/P).
2.1. | Remove the 2 bolts (1). |
2.3. | Disconnect the wiring harness plug (2). |
2.4. | Release and disconnect wiring harness plug. |
- Remove the center air outlet (1).
Release the 6 clips (2).
Installation Procedure
- Install the center air outlet.
Install the 6 clips.
- Install the accessory panel onto the I/P.
Notice: Refer to Fastener Notice in the Preface section.
- Connect the wiring harness plug.
Clip in the panel.
Tighten
Tighten the 2 bolts to 5 N·m (44 lb in).
- Install the heating/air conditioning control. Refer to
Heater and Air Conditioning Control Replacement.