3.1. | Push up on the side covers to access the screws. |
3.2. | Remove the 4 screws. |
Important:
ā¢ | Tighten the rear window in the upper position. |
ā¢ | Install the position window pane with the curve facing down. |
Notice: Refer to Fastener Notice in the Preface section.
Align the rear window gap 1.5-2 mm (0.06-0.08 in).
Tighten
Tighten the 4 screws to 4 NĀ·m (35 lb in).