GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front floor console. Refer to Front Floor Console Replacement .

  2. Object Number: 1939173  Size: SH
  3. Remove the selector linkage (2) from the selector lever.
  4. • Remove the retaining clamp (1).
    • Disconnect the selector lever from the bracket.

    Object Number: 1938428  Size: LF
  5. Remove the selector lever assembly.
  6. • Disconnect the wiring harness plug (1).
    • Remove the 4 bolts (2).
    • Remove the selector lever assembly.

    Object Number: 1938431  Size: LF
  7. Remove the lock control solenoid selector lever lock (2).
  8.    Important: Note the configuration of cables.

    • Disconnect the 2 wiring plugs (1) from the lock control solenoid.
    • Remove the 2 bolts (3).
    • Remove the lock control solenoid from the selector lever lock.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1938431  Size: LF

    Important: Note the configuration of cables.

  1. Install the lock control solenoid for the selector lever lock (2).
  2. • Insert the lock control solenoid for the selector lever lock.

    Tighten
    Tighten the 2 bolts (3) to 4 N·m (35 lb in).

    • Connect the 2 wiring plugs (1) to the lock control solenoid.

    Object Number: 1938428  Size: LF
  3. Install the selector lever assembly.
  4. • Insert the selector lever assembly.

    Tighten
    Tighten 4 bolts (2) 5 N·m (44 lb in).

    • Connect the wiring harness plug (1).

    Object Number: 1939173  Size: SH
  5. Install the selector linkage (2) to the selector lever.
  6. • Install the selector lever to the bracket.
    • Install the retaining clamp (1).
  7. Install the front floor console. Refer to Front Floor Console Replacement .
  8. Check the selector lever safety functions.
  9. For reprogramming procedures, refer to Control Module References .