GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 AURA 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Engine Mount Bracket Replacement

Engine Mount Bracket Replacement First Design

Removal Procedure

    Object Number: 1890894 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement .
  2. Remove the engine mount bracket to engine bolts (1).
  3. Remove the engine mount bracket (2).

Installation Procedure

    Object Number: 1890894 Size: SH
  1. Position the engine mount bracket (2) to the engine.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the engine mount bracket bolts (1).
  3. Tighten the engine mount bracket bolts.

    4. Tighten
    Tighten the bolts to 100 N·m (74 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement .

Engine Mount Bracket Replacement Second Design

Removal Procedure

    Object Number: 1998854 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement .
  2. Remove the engine mount bracket to engine bolts (1).
  3. Remove the engine mount bracket (2).

Installation Procedure

    Object Number: 1998854 Size: SH
  1. Position the engine mount bracket (2) to the engine.
  2. Install the engine mount bracket bolts (1) in the following locations:
    3. • The long bolts in the forward and lower front holes
    • The short bolt in the upper rear hole

    Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the engine mount bracket bolts in the following sequence:
    4. 3.1. Upper Left
    3.2. Lower Left
    3.3. Right

    Tighten
    Tighten the bolts to 100 N·m (74 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement .