Callout
| Component Name
|
Preliminary ProceduresRemove the headlamp assembly. Refer to
Headlamp Replacement.
|
1
| Nozzle Headlamp Washer Cover
Tip
• | Pull out on the nozzle cover to view the retainers on each side. Push in on the tabs to release the cover from the nozzle. |
• | When reinstalling the nozzle cover, push inward to ensure that the cover locks to the place to the nozzle retainers. |
|
2
| Nozzle Headlamp Washer Screw
Caution: Refer to Fastener Caution in the Preface section.
Tighten 2 N·m (18 lb in) |
3
| Nozzle Headlamp Washer
Tip Pull up on the nozzle head to remove it from the fascia. |
4
| Nozzle Headlamp Washer Clamp
|
5
| Nozzle Headlamp Washer Hose
Tip Have the new nozzle ready when removing the old nozzle to reduce loss of washer fluid. |