GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2009 🢒 9-7x 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Windshield Side Reveal Molding Replacement

Removal Procedure

    Object Number: 588275 Size: SH
  1. Open the front door.
  2. Remove the push-pin retainers (2) from the front door sealing auxiliary weatherstrip located at the base of the pillar.

    3. Object Number: 441415 Size: SH
  3. Pull back the front door sealing weatherstrip (1) in order to expose the side reveal molding retainer screws (2).

    4. Object Number: 301107 Size: SH
  4. Remove the screws from the side reveal molding.
  5. Remove the windshield side reveal molding.

Installation Procedure
  1. Install the windshield side reveal molding under the outer edges of the air inlet grille panel.

    2. Object Number: 441415 Size: SH
  2. Position the windshield side reveal molding (2) to the windshield pillar.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 301107 Size: SH
  3. Install the screws to the side reveal molding and tighten to 2 N·m (18 lb in).
  4. Reposition the front door weatherstrip to the pinch-weld flange.

    5. Object Number: 588275 Size: SH
  5. Install the push-pin retainers (2) to the front door sealing weatherstrip located at the base of the pillar.
  6. Close the door.