For 1990-2009 cars only
- Adjust the valve timing.
- Loosen the bolt and remove the timing belt pulley (1). In loosening the bolt, use the driver (2) in the picture as shown.
- Remove the oil level gage guide tube (2) and the timing belt front lower cover (1).
- Remove the timing belt tensioner (2) and the timing belt (1).
- Using the bolt, turn the crankshaft clockwise to align the mark (4) on the crankshaft sprocket with the pointer (3) on the oil pump housing. Then, turn the camshaft to align the notch (1) with the pointer (2).
- Install the timing belt (1) and the tensioner (2).
- Turn the crankshaft twice clockwise. Align the mark (3) with the pointer (4) and tighten the tensioner bolt.
- Install all removed parts.
Important: Do not tighten the tensioner bolt completely.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the tensioner bolt to 19 N·m (14 lb ft).
