For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the rod clamp. Refer to Shift Linkage Adjustment.
- Remove the console.
- Remove the gearshift lever housing bolts and the gearshift lever housing.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the gearshift lever housing.
- Install the gearshift lever housing bolts and tighten to 7 N·m (62 lb in).
- Adjust the shift linkage. Refer to Shift Linkage Adjustment.
- Install the console.
- Connect the negative battery cable.
Caution: Refer to Fastener Caution in the Preface section.
