For 1990-2009 cars only
- Check to see if the sliding surface of the disc, plate, and flange are worn or burnt. Replace them if necessary.
- Using vernier calipers, measure the free length of the direct clutch return spring together with the spring sheet.
- Check that the check ball is free by shaking the direct clutch piston.
- Check that the valve does not leak by applying low-pressure compressed air.
Warning: Refer to Safety Glasses Warning in the Preface section.
| • | If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all discs. |
| • | Before assembling new discs, soak them in ATF for at least 15 minutes. |
Specifications
Standard free length is 36.04 mm (1.4189 in).
