Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics | |||
1 | Did you review the Theft Deterrent Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the lights are inoperative in Alarm mode. Does the system operate normally? | Go to Step 3 | |
3 | With the alarm in alarm mode, Test cavity 8 of the Theft Deterrent Module for continuity to ground. Refer to Circuit Testing . Is continuity to ground present? | Go to Step 4 | Go to Step 5 |
4 | Repair the open in the hazard lamp signal circuit between cavity 8 of the Theft Deterrent Module and splice 216. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 6 | -- |
5 | Replace the Theft Deterrent Control Module. Refer to Theft Deterrent Module Replacement . Did you complete the repair? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
