Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics | |||
1 | Did you review the Theft Deterrent Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify the horn is inoperative in alarm mode. Does the system operate normally? | Go to Step 3 | |
3 | With the alarm in alarm mode, test cavity 5 of the Theft Deterrent Module for continuity to ground. Refer to Circuit Testing . is continuity to ground present? | Go to Step 4 | Go to Step 5 |
4 | Repair the open in the horn signal circuit between cavity 5 of the theft deterrent module and splice 214. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 6 | -- |
5 | Replace the Theft Deterrent Control Module. Refer to Theft Deterrent Module Replacement . Did you complete the repair? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
