Hose Replacement Hose Connector to Washer Nozzle

1. Remove the 3 lower plastic retainers that retain the hood insulator.
2. Fold back the bottom of the hood insulator in order to gain access to the windshield washer nozzle hose.



3. Disconnect the washer hose (3) from the following components:

•	The washer nozzle (4)

•	The hose connector (2)

4. Position the hose connector higher than washer solvent container, if necessary in order to prevent the washer fluid from being lost.
5. Remove the washer hose (3) from the vehicle.

1. Install the washer hose (3) to the vehicle and connect the hose to the following components:

•	The hose connector (2)

•	The washer nozzle (4)

2. Reposition the hood insulator back to its original position. Secure the insulator with the 3 plastic retainers.

Hose Replacement Hose Connector to Washer Container

1. Remove the right front wheelhouse panel liner. Refer to Wheelhouse Panel Replacement.
2. Remove the 3 lower retainers from the hood insulator.
3. Fold back the hood insulator.



4. Disconnect the washer hose (1) from the Y-shaped hose connector (2).
5. Perform one of the following actions in order to prevent the washer fluid from being lost:

•	Plug the open of the hose connector

•	Position the hose connector higher than washer solvent container

•	Drain the washer solvent

•	Disconnect the washer hose (1) from the washer pump.

6. Remove the washer hose (1) from the vehicle.

1. Install the washer hose (1) to the vehicle and connect to the washer pump.
2. Connect the washer hose (1) to the Y-shaped hose connector (2).
3. Install the right front wheelhouse panel liner. Refer to Wheelhouse Panel Replacement .
4. Fill the washer solvent container with washer solvent, as necessary.