GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Engine 🢒 Engine Electrical 🢒 Instrument Cluster Replacement

Removal Procedure

    Object Number: 835522 Size: SH

    Important: The ignition switch must be in the OFF position when removing the instrument cluster assembly.

  1. Remove the IP cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .
  2. Remove the screw (1) which secures the instrument cluster assembly (2).
  3. Disengage the 2 lower clips (3).
  4. Disconnect the electrical connector from the cluster assembly (2).
  5. Remove the cluster assembly (2) from the instrument panel assembly.

Installation Procedure

    Object Number: 835522 Size: SH
  1. Connect the electrical connector to the instrument cluster assembly (2).
  2. Install the cluster assembly (2) to the instrument panel assembly. Secure the assembly with the screw (1) and the 2 clips (3).
  3. Install the IP cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .