GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Inflatable Restraint Seat Position Sensor Replacement

Removal Procedure
  1. Remove the front seat. Refer to Front Seat Replacement - Bucket.
  2. Disconnect the seat position sensor electrical connector.

    3. Object Number: 2022923 Size: SH
  3. Remove the seat position sensor fastener.
  4. Remove the seat position sensor (1).

    5. Object Number: 2022926 Size: SH
  5. Remove the seat position sensor from the seat slide position sensor protector.

Installation Procedure

    Object Number: 2022930 Size: SH
  1. Install the seat position sensor to the seat slide position sensor protector.

    2. Object Number: 2022923 Size: SH
  2. Install the seat position sensor (1).
  3. Install the seat position sensor fastener.

    4. Object Number: 2022929 Size: SH
  4. Insert a 1.3 mm (0.0512 in) feeler gage between the seat position sensor (1) and seat rail (2).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the seat position sensor fastener.

    6. Tighten
    Tighten the seat position sensor fastener to 8 N·m (71 lb in).


    Object Number: 1463088 Size: SH
  6. Check that the clearance (A) between the seat position sensor (1) and seat rail (2) is 0.6 mm (0.023 in) to 2 mm (0.079 in).
  7. Connect the seat position sensor electrical connector.
  8. Install the front seat. Refer to Front Seat Replacement - Bucket.