Inflatable Restraint Passenger Presence System Replacement - Front Module

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the right front seat. Refer to Front Seat Replacement - Bucket .
3. Disconnect the electrical connector from the passenger presence system (PPS) module (1).
4. Remove the 2 PPS module screws (2).
5. Remove the PPS module (3).

1. Install the PPS module (3).
2. Install the 2 PPS module screws (2).

Tighten
Tighten the PPS module screws to 3 N·m (27 lb in).

3. Connect the electrical connector to the PPS module (1).
4. Install the right front seat. Refer to Front Seat Replacement - Bucket .
5. Enable the SIR system. Refer to SIR Disabling and Enabling .
6. Perform PPS Rezeroing procedure. Refer to Passenger Presence System Rezeroing .

Inflatable Restraint Passenger Presence System Replacement - Front Sensor

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the right front seat. Refer to Front Seat Replacement - Bucket .
3. Remove the front front seat cushion cover and pad. Refer to Front Seat Cushion Replacement .




Disconnect the PPS sensor electrical connector (1).




5. Remove the 2 PPS sensor clips (1) and the PPS sensor (2).

1. Install the PPS sensor (2) and the PPS sensor clips (1).




Connect the PPS sensor electrical connector (1).

3. Install the front front seat cushion cover and pad. Refer to Front Seat Cushion Replacement .
4. Install the right front seat. Refer to Front Seat Replacement - Bucket .
5. Enable the SIR system. Refer to SIR Disabling and Enabling .
6. Perform PPS Rezeroing procedure. Refer to Passenger Presence System Rezeroing .