Dome Lamp Replacement Map Lamp With Sunroof

1. Using a trim removal tool, disengage the four clips.
2. Disconnect the electrical connector and remove the map light assembly.



3. Turn the two map light bulbs and the two map light sockets counter clockwise and remove them as a unit.
4. Remove the two map light bulbs from the map light sockets.

1. Install the map light bulbs to the map light sockets.
2. Install the map light bulbs to the map light by turning the two map light bulbs clockwise.



3. Connect the electrical connector.
4. Engage the four clips and install the map light assembly.

Dome Lamp Replacement Map Lamp Without Sunroof

1. Using a trim removal tool, disengage the four clips.
2. Disconnect the electrical connector and remove the map light assembly.



3. Turn the two map light bulbs and the two map light sockets counter clockwise and remove them as a unit.
4. Remove the two map light bulbs from the map light sockets.

1. Install the map light bulbs to the map light sockets.
2. Install the map light sockets to the map light by turning clockwise.



3. Connect the electrical connector.
4. Engage the four clips and install the map light assembly.

Dome Lamp Replacement Center and Rear

1. Using a taped flat-bladed tool, disengage the four clips and remove the lens cover (1).



2. Disengage the clip (2) and guide (1) in the order shown in the illustration, and remove the dome lamp cover.



3. Using a taped flat-bladed tool, disengage the two clips (2) as shown in the illustration.
4. Disengage the two clips (1).



5. Using a taped flat-bladed tool, disengage the four clips and remove the dome lamp assembly.

1. Engage the guide (1) and clip (2) in the order shown in the illustration, and install the dome lamp cover.



2. Engage the four clips and install the lens cover.



3. Engage the four clips and install the dome lamp switch base to the center dome lamp assembly.



4. Engage the four clips and install the dome lamp assembly.