For 1990-2009 cars only
Removal Procedure
- Remove the headliner. Refer to Headlining Trim Panel Replacement.
- Peel the strips of tape (1) used to secure the antenna cable (3) only to the extent that allows removal of the antenna cable (3).
- Pull out the antenna cable (3) from the slit.
- Disengage the three retainers (2), if equipped and remove the antenna cable (3) from the headliner.
Note: Tape is not available as a supply part. Try to leave as much tape as possible on the headliner so that the tape an be reused.
Installation Procedure
- Engage the three retainers (2), if equipped and install the antenna cable (3) to the headliner from the front of the vehicle.
- Put the strips of tape (1) back into the positions shown in the illustration in order to secure the antenna cable (3) to the headliner.
- Install the headliner. Refer to Headlining Trim Panel Replacement.
Note: If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the antenna cable (3) to the headliner.
