GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Safety and Security 🢒 Remote Functions 🢒 Remote Control Door Lock Receiver Antenna Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable.
  2. Remove the right upper quarter panel trim. Refer to Quarter Upper Trim Panel Replacement.

    3. Object Number: 860850 Size: SH
  3. Disconnect the remote control door lock receiver electrical connector (2).
  4. Remove the bolt (3) from the remote control door lock receiver (1).
  5. Remove the remote control door lock receiver (1) from the vehicle.

    6. Object Number: 860853 Size: SH
  6. Using a flat-bladed tool, remove the mounting bracket (1) from the receiver (2), if necessary.

Installation Procedure

    Object Number: 860853 Size: SH
  1. Install the remote control door lock receiver (2) to the mounting bracket (1), if removed.

    2. Object Number: 860850 Size: SH
  2. Install the remote control door lock receiver (1) to the vehicle.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the bolt (3) to the door lock receiver (1).

    4. Tighten
    Tighten the remote control door lock receiver bolt to 10 N·m (89 lb in).

  4. Connect the remote control door lock receiver electrical connector (2).
  5. Install the right upper quarter panel trim. Refer to Quarter Upper Trim Panel Replacement.
  6. Connect the negative battery cable.
  7. Reprogram the remote control door lock receiver, if necessary. Refer to Transmitter Programming.