GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Roof 🢒 Sunroof 🢒 Sunroof Motor/Actuator Replacement

Removal Procedure

    Object Number: 2015654 Size: SH
  1. Remove the headlining trim finish panel. Refer to Headlining Trim Panel Replacement.
  2. Disconnect the sunroof actuator electrical connector.

    3. Note: Remove the sunroof actuator with the motor in the fully closed position.

  3. Remove the following components from the vehicle:
    4. • The 3 bolts (2)
    • The sunroof actuator (1)

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2015654 Size: SH
  1. Install the sunroof actuator (1) to the vehicle. Secure the actuator with the 3 bolts (2).

    2. Tighten
    Tighten the sunroof actuator bolts to 5.5 N·m (49 lb in).

  2. Connect the sunroof actuator electrical connector.
  3. Install the headlining trim finish panel. Refer to Headlining Trim Panel Replacement.