GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Power and Signal Distribution 🢒 Power Outlets 🢒 Accessory AC and DC Power Control Module Replacement

Removal Procedure
  1. Remove the communication interface module. Refer to Communication Interface Module Replacement.

    2. Object Number: 2033182 Size: SH
  2. Disconnect the clamp and connector.
  3. Remove the 3 bolts (1) and the voltage inverter assembly.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2033182 Size: SH
  1. Install the voltage inverter assembly with the 3 bolts (1).

    2. Tighten
    Tighten the bolts to 19 N·m (14 lb ft).


    Object Number: 2033184 Size: SH
  2. Install the communication interface module (1). Refer to Communication Interface Module Replacement.