Removal Procedure
- Open the front side door.
Note: Remove only one hinge at a time in order to keep the door properly aligned.
- Remove the 2 door to hinge bolts (2).
- Remove the 2 hinge to door jamb bolts (3).
- Remove the upper (1) or lower (4) hinge from the vehicle.
Installation Procedure
- Install the hinge (1 or 4) to the door jamb. Secure the hinge with 2 door jamb bolts (3). Do not fully tighten
at this time.
Caution: Refer to Fastener Caution in the Preface section.
- Install the 2 door to hinge bolts (2). Tighten all hinge bolts and nuts to
26 N·m (19 lb ft).
- Repeat the removal and installation steps for the opposite hinge, if necessary.
- Close the front side door.