GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Trim Panel Replacement

Removal Procedure
  1. Remove the rear door window regulator handle, if equipped. Refer to Door Window Regulator Handle Replacement.

    2. Object Number: 2014783 Size: SH
  2. Using a trim removal tool, disengage the three clips and remove the rear door inside handle bezel.

    3. Object Number: 2014785 Size: SH
  3. Using a trim removal tool, disengage the clip and eight retainers.
  4. Disconnect the electrical connector, if equipped and remove the rear door upper armrest trim.

    5. Object Number: 2014788 Size: SH
  5. Remove the three screws from the rear door trim panel.

    6. Object Number: 2014790 Size: SH
  6. Using a trim removal tool, disengage the eight retainers and the four clips and separate the rear door trim panel from the rear door inner belt sealing strip.
  7. Remove the rear door trim panel from the vehicle.

Installation Procedure

    Object Number: 2014790 Size: SH
  1. Install the rear door trim panel from the vehicle.
  2. Engage the eight retainers and the four clips and install the rear door trim panel to the rear door inner belt sealing strip.

    3. Object Number: 2014788 Size: SH
  3. Install the three screws to the rear door trim panel.

    4. Object Number: 2014927 Size: SH
  4. Connect the electrical connector, if equipped and install the rear door upper armrest trim.
  5. Engage the clip and eight retainers.

    6. Object Number: 2014928 Size: SH
  6. Engage the three clips and install the rear door inside handle bezel.
  7. Install the rear door window regulator handle, if equipped. Refer to Door Window Regulator Handle Replacement.