Rear Brake Caliper Bracket Replacement All Wheel Drive and GT

1. Remove the disc brake hardware and the slide pin boots. Refer to Rear Disc Brake Hardware Replacement.



2. Remove the 2 bolts (1, 2).
3. Remove the rear brake caliper bracket.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the rear brake caliper bracket with the 2 bolts (1, 2) and tighten to 58 N·m (43 lb ft).
2. Install the disc brake hardware and the slide pin boots. Refer to Rear Disc Brake Hardware Replacement.

Rear Brake Caliper Bracket Replacement Except All Wheel Drive and GT

1. Remove the disc brake hardware and the slide pin boots. Refer to Rear Disc Brake Hardware Replacement.



2. Remove the 2 bolts (1, 2).
3. Remove the rear brake caliper bracket.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the bracket with the 2 bolts (1, 2) and tighten to 63 N·m (46 lb ft).
2. Install the disc brake hardware and the slide pin boots. Refer to Rear Disc Brake Hardware Replacement.