For 1990-2009 cars only
Removal Procedure
- Remove the front wheel hub and bearing. Refer to Front Wheel Hub, Bearing, and Seal Replacement.
- Remove the 3 bolts (4, 5, 7) and the brake shield (3) from the knuckle (2).
Installation Procedure
- Install the brake shield (3) to the knuckle (2).
- Install the 3 bolts (4, 5, 7) and tighten to 8.3 N·m (73 lb in).
- Install the front wheel hub and bearing. Refer to Front Wheel Hub, Bearing, and Seal Replacement.
Caution: Refer to Fastener Caution in the Preface section.
