Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Instrument Cluster Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the Instrument Panel, Gages and Console Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the instrument cluster gages are inoperative. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does an open condition exist? | Go to Step 4 | Go to Step 5 |
4 | Repair the open in the WH/BK wire between the instrument cluster and G200. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- |
5 | With connector still disconnected, test terminal 1 for open or short to ground. Refer to Circuit Testing . Is open or short present? | Go to Step 6 | Go to Step 7 |
6 | Repair the open or short to ground. Refer to Wiring Repairs . Did you repair short or open? | Go to Step 8 | -- |
7 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
