GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2009
🢒
Vibe - AWD
🢒
Driver Information and Entertainment
🢒
Displays and Gages
🢒 Ignition and Start Switch Replacement
Removal Procedure
Disable the SIR system. Refer to
SIR Disabling and Enabling
.
Remove the trim covers from the steering column. Refer to
Steering Column Trim Cover Replacement
.
Disconnect the ignition switch electrical connector (1), if equipped.
Remove the two screws (2),(3) and the ignition switch (1) from the ignition lock cylinder case.
Installation Procedure
Install the ignition switch (1) and the two screws (2),(3) to the ignition lock cylinder case.
Connect the ignition switch electrical connector.
Connect the ignition switch electrical connector (1), if equipped.
Install the trim covers to the steering column. Refer to
Steering Column Trim Cover Replacement
.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.