Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Component Connector End Views DEFINITION: This table diagnoses the front wipers are always ON when the wiper/washer switch is turned to the OFF position. | |||||||||
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||||
2 | Verify that the front wipers are always ON when the wiper/washer switch is turned to the OFF position. Do the front wipers operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 | ||||||
3 |
Did any of the circuits measure a short to voltage? | Go to Step 4 | Go to Step 6 | ||||||
4 |
Does the circuit still have a short to voltage condition? | Go to Step 7 | Go to Step 5 | ||||||
5 | Inspect for poor connections at the harness connector of the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 8 | ||||||
6 | Inspect for poor connections at the harness connector of the wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 9 | ||||||
7 | Repair the short to voltage condition. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 10 | -- | ||||||
8 | Replace the front wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement . Did you complete the replacement? | Go to Step 10 | -- | ||||||
9 | Replace the front wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the replacement? | Go to Step 10 | -- | ||||||
10 | Operate the system in order to verify the repair. Did you correct the condition? | Go to Step 10 | -- | ||||||
