Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the Lighting System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the turn signal lamps and/or indicators are inoperative. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Test cavity 6 of the turn signal/headlamp switch for continuity to ground. Refer to Circuit Testing . Is a ground present? | Go to Step 4 | Go to Step 5 |
4 | Test cavity 1 of the flasher relay for battery positive voltage. Refer to Circuit Testing . Is voltage present? | Go to Step 6 | Go to Step 7 |
5 | Repair open in the ground circuit between cavity 6 of the turn signal/headlamp switch and G200. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- |
6 | Replace the flasher relay. Did you complete the repair? | Go to Step 8 | -- |
7 | Repair open or short to ground in the flasher relay supply voltage circuit. Refer to Circuit Testing . Did you complete the repair? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
