GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Rear Side Door Window Regulator Replacement

Removal Procedure

    Object Number: 2014807 Size: SH
  1. Remove the rear door window. Refer to Rear Side Door Window Replacement.
  2. Disconnect the electrical connector (1), if equipped.

    3. Note: Do not remove the temporary bolt. If the temporary bolt is removed, the rear door window regulator may fall, causing damage.

  3. Loosen the temporary bolt (2), if equipped.
  4. Remove the three bolts (3).
  5. Remove the rear door window regulator assembly (4) from the rear door.

    6. Object Number: 2015304 Size: SH
  6. Remove the three screws (1) and the power window motor (2) from the window regulator (3), if equipped.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2015304 Size: SH
  1. Install the three screws (1) and the power window motor (2) to the window regulator (3), if equipped. Tighten the power window motor screws to 5.4 N·m (48 lb in).

    2. Object Number: 2014807 Size: SH
  2. Apply a multipurpose grease to all lubrication and sliding points.
  3. Install the rear door window regulator assembly (4) to the rear door.
  4. Install the temporary bolt (2), if equipped and tighten to 8 N·m (71 lb in).
  5. Remove the three bolts (3) and tighten to 8 N·m (71 lb in).
  6. Connect the electrical connector (1), if equipped.
  7. Install the rear door window. Refer to Rear Side Door Window Replacement.