It is necessary to initialize the system when any of the following conditions occur:
| • | Prior to delivery of a new vehicle. |
| • | After replacement of the tire pressure control module. |
| • | After replacement of any of the tire pressure sensors. |
- If necessary, perform
Tire Pressure Sensor Learn
.
- Adjust all tire pressures to the proper specification.
- With the ignition On, push and hold the tire pressure warning reset switch until the warning light blinks 3 times. Turn the ignition Off, then turn the ignition On again.
- Using a scan tool, verify the tire pressures are properly displayed. If tire pressures are not displayed, initialization was not completed.
