Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the front tire and wheel assembly from the vehicle. Refer to
Tire and Wheel Removal and Installation.
- Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Remove the nut from the stud
in order to separate the link (3) from the strut bracket (1).
- Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Remove the nut from the stud in order to separate the link from the stabilizer shaft.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Install the nut and the stud to the bracket (1) on the strut. Tighten the nut to
74 N·m (55 lb ft).
- Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Install the nut and the stud to the stabilizer shaft. Tighten the nut to
74 N·m (55 lb ft).
- Install the front tire and wheel assembly to the vehicle. Refer to
Tire and Wheel Removal and Installation.
- Lower the vehicle.