Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement.
- Disconnect the 4 ignition coil connectors (1, 2, 3, 4).
- Remove the 4 bolts and 4 ignition coils (1, 2, 3, 4).
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the 4 ignition coils (1, 2, 3, 4) with the 4 bolts and tighten to
9.0 N·m (80 lb in).
- Connect the 4 ignition coil connectors (1, 2, 3, 4).
- Install the engine cover. Refer to
Engine Cover Replacement.