GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Vibe - AWD 🢒 Body 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure

    Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:

       • Turn off the lamp switch and allow the bulb to cool before changing the bulb.
       • Leave the lamp switch OFF until the bulb change is complete.
       • Always wear eye protection when changing a halogen bulb.
       • Handle the bulb only by its base. Avoid touching the glass.
       • Keep dirt and moisture off the bulb.
       • Properly dispose of the used bulb.
       • Keep halogen bulbs out of the reach of children.


    Object Number: 820581 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the 2 screws (1) and push retainer (3) from the lower splash shield (2).
  3. Disconnect the electrical connector from the fog lamp.

    4. Object Number: 820585 Size: SH
  4. Pry out on tab (1) with a flat-bladded tool and remove fog lamp.

    5. Object Number: 624038 Size: SH
  5. Remove the fog lamp bulb from the fog lamp, turning counterclockwise, if required.

Installation Procedure

    Object Number: 624038 Size: SH
  1. Install the fog lamp bulb to the fog lamp, turning clockwise, if required.

    2. Object Number: 820583 Size: SH
  2. Install the fog lamp (1) to the front bumper fascia (2).

    3. Object Number: 820581 Size: SH
  3. Connect the electrical connector to the fog lamp.
  4. Install the two screws (1) and the push retainer (3) to the front lower splash shield (2).
  5. Lower the vehicle.
  6. Check and adjust the fog lamp aim as necessary. Refer to Fog Lamp Aiming .