GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Vibe - AWD 🢒 Body 🢒 Doors 🢒 Rear Side Door Check Link Replacement

Removal Procedure

    Object Number: 847509 Size: SH
  1. Remove the rear side door trim. Refer to Rear Side Door Trim Panel Replacement .
  2. Pull back the water deflector to gain clearance to remove the rear door check link from the door.
  3. Remove the following components from the vehicle:
    4. • The rear door check link to door jamb bolt (3)
    • The 2 bolts (2) which secure the check link to the rear door
    • The check link (1) through inner door panel access hole

Installation Procedure

    Object Number: 847509 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the check link (1) through the inner door panel access hole. Secure the check link with the 2 bolts (2).

    2. Tighten
    Tighten the check link bolts to 5.5 N·m (49 lb in).

  2. Install the rear door check link to door jamb bolt (3).

    3. Tighten
    Tighten the check link to door jamb bolt to 30 N·m (22 lb ft).

  3. Reposition the water deflector back to it original position.
  4. Install the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement .