GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 626696  Size: SH
  1. The driver side power door lock switch is part of the power accessory switch panel, to replace. Refer to Power Accessory Switch Panel Replacement .
  2. If removing the passenger side power lock switch,use a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (2) from the front side door trim (1).

  3. Object Number: 626703  Size: SH
  4. Disconnect the front side door lock switch electrical connector (3).

  5. Object Number: 626709  Size: SH
  6. Remove the front side door lock switch (1) from the mounting plate (3) by releasing the tabs (5).

Installation Procedure


    Object Number: 626709  Size: SH
  1. Install the front side door lock switch (1) into the mounting plate (3). Ensure that the retaining tabs (5) are completely engaged.

  2. Object Number: 626703  Size: SH
  3. Connect the front side door lock switch electrical connector (3).

  4. Object Number: 626746  Size: SH
  5. Install the front side door accessory switch mounting plate (1) to the front side door trim (2).