For 1990-2009 cars only
- Position the transmission so that the cover of the control valve body is facing upward.
- Remove the following parts:
- Remove the control valve body cover (53).
- Remove the inner (55) and the outer (54) gaskets from the control valve body cover. In some models, remove the seal (59).
| • | On transmissions with a cast aluminum cover: |
| - | 11 flanged bolts (52) |
| - | 2 stud bolts (58) |
| - | 4 TORX® bolts (57) |
| • | On transmissions with a stamped steel cover: |
| - | 15 flanged bolts (52) |
| - | 2 stud bolts (58) |
| - | 6 nuts and washers (50 & 51) |
