Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The starter solenoid clicks but the engine does not crank or cranks slowly. | ||||
1 |
Is the reading greater than the specified value? | 9.5 V | ||
2 | Measure the voltage between the B- and the engine block while the engine is cranking. Is the reading less than the specified value? | 0.5 V | ||
3 | Load test the battery. Refer to Battery Load Test. Is the battery OK? | -- | ||
4 | Replace the negative battery cable Is the repair complete? | -- | -- | |
5 | Measure the voltage between the B+ and the starter solenoid B terminal while cranking the engine. Is the reading less than the specified value? | 0.5 V | ||
6 | Replace the starter motor. Refer to Starter Motor Replacement. Is the repair complete? | -- | System OK | -- |
7 | Replace the battery. Refer to Battery Replacement. | -- | System OK | -- |
8 | Replace the positive battery cable. Is the repair complete? | -- | System OK | -- |
9 | Refer to Section 8A for a complete Engine Electrical system diagnosis. | -- | -- | -- |
