Removal Procedure
- Remove the instrument panel (I/P) upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement.
- Remove the defroster air outlet screws from the I/P upper trim panel.
- Remove the defroster air outlet from the I/P upper trim panel.
Installation Procedure
- Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
- Install the defroster air outlet to the I/P upper trim panel.
Caution: Refer to Fastener Caution in the Preface section.
- Install the defroster air outlet screws to the I/P upper trim panel.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the instrument panel upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement.