Preliminary Procedures

1. Remove the front seat belt adjuster cover.
2. Remove seat belt guide loop bolt. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
3. Remove the center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement .

1

Front Seat Belt Height Adjuster Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Apply Permatex® 24200 on all restraint fasteners prior to installation.

Tighten
40 N·m (30 lb ft)

2

Front Seat Belt Height Adjuster Assembly