Removal Procedure
- Carefully remove the instrument panel dimmer switch
bezel from the dash.
- Disconnect the electrical connector from the traction control switch.
- Remove the traction control switch from the instrument panel dimmer switch
bezel. To avoid damage to the instrument panel dimmer switch bezel, use a flat bladed
tool on the back side of the traction control switch to release the retaining clips.
Installation Procedure
- Install the traction control switch to the instrument
panel dimmer switch bezel.
- Connect the electrical connector to the traction control switch.
- Align the instrument panel dimmer switch bezel to the dash and carefully
press the retaining clips into the correct mounting areas on the dash.
- Verify the repair. Refer to
Diagnostic System Check - Vehicle
in Vehicle DTC
Information.