GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Sunfire 🢒 Accessories 🢒 Entertainment 🢒 Coaxial Cable Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  2. Remove the rear seat back. Refer to Rear Split Folding Seat Back Replacement in Seats.
  3. Remove the right carpet retainers. Refer to Carpet Retainer Replacement in Interior Trim.
  4. Pull back the carpet for access to the wiring harness as required.
  5. Disconnect the antenna coaxial cable from the rear of the radio. Refer to Radio Replacement .

    6. Object Number: 777624 Size: SH
  6. Cut off the visible end of the coaxial antenna cable (1) from the wiring harness in the instrument panel area.
  7. Pull down the rear compartment trim to access the coaxial cable at the antenna base.
  8. Disconnect the coaxial cable from the antenna base.
  9. Cut off the visible end of the coaxial antenna cable from the wiring harness in the rear shelf area.

Installation Procedure

    Object Number: 362090 Size: SH
  1. Install the coaxial antenna cables to the wiring harness. Use electrical tape in order to secure the antenna extension cable to the top of the wiring harness. Secure the cable to the harness at least every 150 mm (6 in).
  2. Connect the coaxial cable to the antenna base.
  3. Reposition the rear compartment trim to the desired appearance.
  4. Connect the coaxial antenna cable to the rear of the radio. Install the radio. Refer to Radio Replacement .
  5. Reposition the carpet.
  6. Install the right carpet retainers. Refer to Carpet Retainer Replacement in Interior Trim.
  7. Position the coaxial antenna cable from the body wiring harness to the rear shelf area.
  8. Install the rear seat back. Refer to Rear Split Folding Seat Back Replacement in Seats.
  9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.