Front Fog Lamp Replacement Pontiac

Caution: Refer to Halogen Bulb Caution in the Preface section.

1. Partially remove the front edge of the front fender liner to gain access to the fog lamps. Refer to Front Fender Liner Replacement in Body Front End.



2. Remove the fog lamp bulb/socket from the fog lamp.
3. Remove the nuts (2) from the fog lamp.
4. Remove the fog lamp (1) from the front bumper fascia.

1. Install the fog lamp (1) to the front bumper fascia.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts (2) to the fog lamp.

Tighten
Tighten the fog lamp nuts to 2 N·m (18 lb in).

3. Install the fog lamp bulb/socket to the fog lamp.



4. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.

Front Fog Lamp Replacement Chevrolet

Caution: Refer to Halogen Bulb Caution in the Preface section.

1. Partially remove the front edge of the front fender liner to gain access to the fog lamps. Refer to Front Fender Liner Replacement in Body Front End.
2. Remove the fog lamp bulb/socket from the fog lamp.
3. Remove the nuts (2) from the fog lamp.



4. Remove the fog lamp from the front bumper fascia.

1. Position the fog lamp to the front bumper fascia.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fog lamp nuts  (2) to the fog lamp.

Tighten
Tighten the nuts to 6 N·m (53 lb in).

3. Install the fog lamp bulb/socket to the fog lamp.
4. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.