Fog Lamp Switch Replacement Pontiac

1. Remove the fog lamp/dimmer switch trim plate from the instrument panel using a small flat-bladed tool.



2. Disconnect the electrical connectors from the fog lamp/dimmer switches.



3. Remove the fog lamp/dimmer switch bulb using a small flat-bladed tool turning counterclockwise, if required.



4. Release the retainer tabs on the fog lamp switch using a small flat-bladed tool on the back side.



5. Remove the fog lamp switch from the trim plate.

1. Install the fog lamp switch to the trim plate pressing into place until fully seated.



2. Install the fog lamp/dimmer switch bulb using a small flat-bladed tool turning clockwise, if required.



3. Connect the electrical connectors to the fog lamp/dimmer switches.



4. Install the fog lamp/dimmer switch trim plate to the instrument panel pressing into place until fully seated.

Fog Lamp Switch Replacement Chevrolet

1. Remove the instrument panel (I/P) cluster trim panel to access the fog lamp switch. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.
2. Release the retainers on the fog lamp/dimmer switch housing using a small flat-bladed tool.
3. Remove the fog lamp/dimmer switch (3) housing from the I/P cluster trim panel.

1. Install the fog lamp/dimmer switch (3) housing to the I/P cluster trim panel, pressing into place until fully seated.
2. Install the to the I/P cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.