Removal Procedure
Tools Required
J 38778 Door Trim Pad Clip
Remover
- Remove the rear split folding seat back. Refer to
Rear Split Folding Seat Back Replacement
in Seats.
- Remove the coat hook. Refer to
Coat Hook Replacement
.
- Remove the front seat belt anchor bolt, and shoulder guide bolt. Refer
to
Front Seat Belt Retractor Replacement
in Seat Belts.
- Use a J 38778
to remove the pushin retainer (5) from the quarter panel extension (4).
- Remove the quarter trim panel extension (4).
- With a flat-bladed tool remove the seat belt escutcheon (6) form
the trim panel (3).
- Pull out the top of the quarter trim panel (3).
- Pull the trim panel (3) firmly and evenly to disengage the retainers
from the inner quarter panel (1).
- Route the seat belt (7) through the opening in the trim panel (3).
- Remove the trim panel (3) from the vehicle.
Installation Procedure
- Position the trim panel (3) into
the vehicle.
- Route the seat belt (7) through the opening in the trim panel (3).
- Align the trim panel retainers with the openings in the inner quarter
panel (1).
- Press the trim panel (3) firmly and evenly in order to engage the
retainers to the inner quarter panel (1).
- Install the seat belt escutcheon (6) to the trim panel (3).
- Install the quarter trim panel extension (4).
- Install the push retainer (5) to the quarter trim panel extension.
- Install the front seat belt anchor bolt, and shoulder guide bolt. Refer
to
Front Seat Belt Retractor Replacement
in Seat Belts.
- Install the coat hook. Refer to
Coat Hook Replacement
.
- Install the rear split folding seat back. Refer to
Rear Split Folding Seat Back Replacement
in Seats.