Rear Compartment Lid Applique Replacement Pontiac Sedan/Chevrolet - All

1. Disconnect the wire harness sockets from the back-up light.
2. Remove the nuts (1) from the rear compartment lid applique.
3. Remove the lid applique (5) from the rear compartment.

1. Install the lid applique (5) to the rear compartment.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts (1) to the rear compartment lid applique.

Tighten
Tighten the nuts to 5 N·m (44 lb in).

3. Connect the wire harness sockets to the back-up light assemblies.